Editing a block item
The window is used both to create new user-defined block items and to display and edit the header data of user-defined attributes of existing user-defined block items or system block items.
1. Open the Line block editor. Then, in the Block view, right-click the desired block item (Opening the Line block editor).
The context menu opens.
2. On the shortcut menu, click Edit line block item.
The Edit line block item window opens. Depending on block item type, different input options are provided.
3. Make the desired changes.
General |
|
Element |
Description |
Block |
Output of ID and Code of the line block to which the item belongs |
Block day |
Number of the block day |
Block item type |
Output of the type |
Line |
Output of the name of the line to which the item belongs |
Vehicle journey |
Output of the vehicle journey |
Section |
Output of the section |
Valid day |
Output of the valid day |
Basis tab |
|
Element |
Description |
Start at |
Time of the start of the block item |
In |
Start stop of the block item |
Duration |
Duration of the block item |
End at |
Time of the end of the block item |
In |
End stop of the block item |
Length |
Distance covered by the block item |
Is change of running direction |
If this option has been checked, the running direction is changed within this block item. This option is important for line blocking regarding changes to the running direction. |
Used system route |
System route used for empty trips In a list of suitable system routes, click the icon to select the system route you want to use as a data basis for empty trips. Note The option is only available for empty trips. |
Notes: In the Basis tab, the settings can only be edited for user-defined block items and empty trips. |
4. Confirm with OK.
Your settings are saved.